Battery pack 18V, LiHD 4.0 Ah
- PRODUCT INFORMATION For cordless classic x and Zeta Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Battery pack 18V, LiHD 5.5 Ah
- PRODUCT INFORMATION For cordless classic x and Zeta Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Invis Mx2 MiniMag, incl. screw bit
- PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
- Add to basket
Invis Mx2 Starterset, in systainer
- PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
- Add to basket
Invis Mx2 joiner set, 20 pairs incl. 30 mm studs
- PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
- Add to basket
Invis Mx2 joiner set, 20 pairs incl. 14 mm studs
- PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
- Add to basket
Lamello Suction Adapter for Biscuit Jointers
- PRODUCT INFORMATION Lamello Suction Adapter for Biscuit Jointers. Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Extractor stub 23mm for biscuit joiner
- PRODUCT INFORMATION Curved design made from black plastic. Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Cabineo hex bit, 80 mm
- PRODUCT INFORMATION The Lamello Cabineo Hex Bit is specifically designed to be used with Lamello Cabineo connectors. Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Lamello Dust Bag for Zeta/Classic
- PRODUCT INFORMATION Dust bag, for Zeta P2, Top 21, Classic X Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Dust bag + adapter Ø 36 mm
- PRODUCT INFORMATION Dust bag, incl adapter 36mm, for Zeta P2, Top 21, Classic X Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Clamex P Installation tool, for all angles fast
- PRODUCT INFORMATION Clamex P Installation tool, flexible, hexagon head key, L 290x30mm Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Zeta P2 positioning clip CNC, for drill hole Ø6 mm
- PRODUCT INFORMATION Lamello 6mm Positioning Clip for positioning in the Clamex access hole. Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Positioning pins D8 mm for combination with CNC
- PRODUCT INFORMATION Instead of using an angle aggregate or 5-axis CNC machine, the Lamello Zeta P2 jointer can be used to cut a P-System groove in materials. Depending on which diameter pins you have, simply drill two 5mm or 8mm holes spaced at 101mm to the centres, in the workpiece surface using a CNC machine and then complete the cut by…
- Add to basket
Positioning pins D5 mm for combination with CNC
- PRODUCT INFORMATION Instead of using an angle aggregate or 5-axis CNC machine, the Lamello Zeta P2 jointer can be used to cut a P-System groove in materials. Depending on which diameter pins you have, simply drill two 5mm or 8mm holes spaced at 101mm to the centres, in the workpiece surface using a CNC machine and then complete the cut by…
- Add to basket
Cabineo cover cap, 100 pieces, RAL 9003 signal white
- PRODUCT INFORMATION The new metallic colours „silver“, „nickel“ and „dark steel“ complete the already extensive Cabineo cover cap range. With the new metallic-look versions, the colour of the cover cap can be matched to the aluminium or stainless steel fittings and the Cabineo connector can become a design element in the piece of furniture. There are now different options for visually…
- Add to basket
Cabineo 12, 500pcs
- PRODUCT INFORMATION Cabineo 12 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with…
- Add to basket
Cabineo 8, 500pcs, for centre panels from 16mm
- PRODUCT INFORMATION Cabineo 8 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with…
- Add to basket
Cabineo 8 M6 Starterset
- PRODUCT INFORMATION Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is ideal when joining wood composites with materials such as aluminium, steel or compact laminate. After installing the connector in the board, the pre-assembled metric screw is screwed into a threaded hole or a socket, using a cordless drill. Cabineo impresses with its time-saving…
- Add to basket
Cabineo Starter set with 40 pcs Cabineo 8/12
- PRODUCT INFORMATION Cabineo is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high…
- Add to basket
Glue applicator Lamello Minicol with plastic nozzle
- PRODUCT INFORMATION Minicol is a universal glue applicator and the ideal solution for applying glue in 4 mm grooves. Unlike with a glue bottle, the glue exits the nozzle on the sides. Therefore glue is applied to the groove sides instead of the groove bottom, resulting in better distribution and a more stable joint. As the glue applicators are positioned with the nozzles facing downwards in the wooden base, the glue…
- Add to basket
Simplex inserting tool
- PRODUCT INFORMATION For easy insertion of the Lamello Simplex 2 part knock down connectors. Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Divario P-18, 300 pairs
- PRODUCT INFORMATION Divario P-18 is a detachable connector for slide-in insertion and is anchored in the form-locking P-System groove within seconds. The connector is used to slide shelves or partitions into an already assembed cabinet. In the process, the Divario P-18 clamps the workpieces together firmly and ensures perfectly closed joints without visible connectors. Divario P-18 is used for joining shelves to divisions from 18 mm panel thickness or in butt…
- Add to basket
Divario P-18, 80 pairs
- PRODUCT INFORMATION Divario P-18 is a detachable connector for slide-in insertion and is anchored in the form-locking P-System groove within seconds. The connector is used to slide shelves or partitions into an already assembed cabinet. In the process, the Divario P-18 clamps the workpieces together firmly and ensures perfectly closed joints without visible connectors. Divario P-18 is used for joining shelves to divisions from 18 mm panel thickness or in butt…
- Add to basket
Tenso P-14, with preload clip, 300 pairs
- PRODUCT INFORMATION Tenso P-14 is a self-clamping glueing aid and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without the need for clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without the need to wait for the glue to dry. Tenso P-14 is used…
- Add to basket
Tenso P-14, 300 pairs
- PRODUCT INFORMATION Tenso P-14 is a self-clamping glueing aid and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without the need for clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without the need to wait for the glue to dry. Tenso P-14 is used…
- Add to basket
Tenso P-10, with preload clip, 300 pairs
- PRODUCT INFORMATION Tenso P-10 is a self-clamping connector to glue and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without having to wait or the glue to dry. Tenso P-10 is used on mitre…
- Add to basket
Tenso P-10, with preload clip, 80 pairs
- PRODUCT INFORMATION Tenso P-10 is a self-clamping connector to glue and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without having to wait or the glue to dry. Tenso P-10 is used on mitre…
- Add to basket
Tenso P-14, with preload clip, 80 pairs
- PRODUCT INFORMATION Tenso P-14 is a self-clamping glueing aid and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without the need for clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without the need to wait for the glue to dry. Tenso P-14 is used…
- Add to basket
Tenso P-14, 80 pairs
- PRODUCT INFORMATION Tenso P-14 is a self-clamping glueing aid and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without the need for clamps or presses, regardless of the angle of the work pieces. Aesthetic joining is possible without visible connectors, with short assembly times and without the need to wait for the glue to dry. Tenso P-14 is used…
- Add to basket
Tenso P-10 / P-14 Insertion tool
- PRODUCT INFORMATION The Lamello preload insertion tool aids in the correct placing of the Tenso pre-load clips into the Tenso connector. For the easy insertion of pre-loading clips into a Tenso connector Fits both P-14 and P-10 size pre-loading clips Pre-loading lowers the force required without lessening the final power Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
Clamex P-10, 300 pairs
- PRODUCT INFORMATION Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and…
- Add to basket
Clamex P-10, 80 pairs
- PRODUCT INFORMATION Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and…
- Add to basket
Clamex P-14/10 Medius, 300 pairs
- PRODUCT INFORMATION Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a lever. The connector for divisions has two installation depths and is used when two shelves are attached to the same dividing panel at the same height. Due to the reduced installation depth of 10…
- Add to basket
Clamex P-14/10 Medius, 80 pairs
- PRODUCT INFORMATION Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a lever. The connector for divisions has two installation depths and is used when two shelves are attached to the same dividing panel at the same height. Due to the reduced installation depth of 10…
- Add to basket
Clamex P-14, 1000 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14, 300 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14, 80 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14/10 Flexus, 300 pairs
- PRODUCT INFORMATION Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14/10 Flexus, 80 pairs
- PRODUCT INFORMATION Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and…
- Add to basket
P-System connector assortment basic, in systainer
- PRODUCT INFORMATION Lamello 145314 P-system connector assortment Basic Set includes: 80 pairs Clamex P-14 80 pairs Tenso P-14 incl. clip 60 pairs Clamex P Medius 20 stuks Bisco P 14 Systainer T-Loc II incl. compartment dividers Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
P-System connector assortment professional, in Sortainer
- PRODUCT INFORMATION The Lamello 145312 Professional P-System Connector Assortment is the perfect add-on to your Zeta. With an assortment of different connectors and accessories, this set will keep your organized and efficient while introducing you to the various connector options. Set includes: 120 pair Clamex P-14 30 pair Clamex P Medius 30 pair Clamex P-10 80 pair Tenso P-14 plus pre-load…
- Add to basket
Bisco P-10, 80 pieces
- PRODUCT INFORMATION Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined…
- Add to basket
Bisco P-14, 80 pieces
- PRODUCT INFORMATION Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined…
- Add to basket
Clamex S-18, 80 pairs, incl. marking jig and screws
- PRODUCT INFORMATION Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in…
- Add to basket
Clamex S-18, 18 pairs, incl. marking jig and screws
- PRODUCT INFORMATION Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in…
- Add to basket
E20-l self-clamping element, 80 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
E20-H self-clamping element, 80 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
E20-L/E20-H self-clamping element assorted , 40/40 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
C10 transparent element, 300 pieces
- PRODUCT INFORMATION C10 and C20 plastic biscuits are the proven joining solution for mineral composite materials such as Corian, Varicor. The white transparent plastic ensures that the connectors do not show through thin materials. The specific adhesive for composites can be used for the joints as well as for the biscuits. Since the C10 and C20 do not swell, these biscuits are also suitable for outdoor or wet areas. The…
- Add to basket
C20 transparent element, 250 pieces
- PRODUCT INFORMATION C10 and C20 plastic biscuits are the proven joining solution for mineral composite materials such as Corian, Varicor. The white transparent plastic ensures that the connectors do not show through thin materials. The specific adhesive for composites can be used for the joints as well as for the biscuits. Since the C10 and C20 do not swell, these biscuits are also suitable for outdoor or wet areas. The…
- Add to basket
K20 clamping element , 250 pieces
- PRODUCT INFORMATION K20 is a clamping element and can be used with any Lamello biscuit joiner. K20 has barbed ridges on each side of the connector which anchor themsleves into the 4 mm groove. The clamping biscuit is ideal for difficult to clamp workpieces such as fillers or covers and is able to hold workpieces in the correct position until the…
- Add to basket
Lamello Original wood biscuit 20, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
Lamello Original wood biscuit 10, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
Lamello Original wood biscuit H9, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
Lamello Original wood biscuit 0, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
Classic X cordless biscuit joiner, In systainer; including 2 batteries and charger
- PRODUCT INFORMATION Classic X is the original biscuit joiner from the inventor of the Lamello system for cutting the 4 mm groove. The proven and well-designed Classic X is fast and versatile in its use and the basis for the wide range of connectors with fixed, self-clamping and detachable solutions. Precision in every component leads to perfect accuracy of the workpieces,…
- Add to basket
Classic X cordless biscuit joiner, In systainer; without batteries; without charger
- PRODUCT INFORMATION Classic X is the original biscuit joiner from the inventor of the Lamello system for cutting the 4 mm groove. The proven and well-designed Classic X is fast and versatile in its use and the basis for the wide range of connectors with fixed, self-clamping and detachable solutions. Precision in every component leads to perfect accuracy of the workpieces,…
- Add to basket
Zeta P2 cordless biscuit joiner without batteries
- PRODUCT INFORMATION The cordless Zeta P2 is the profile biscuit joiner for even faster joints, suitable for use with P-System connectors. It is used to create the form-locking P-System groove within seconds, and is even more flexible to use thanks to its battery drive. The integrated vertical mechanical drive is automatically triggered at the maximum cutting depth and performs a lateral…
- Add to basket
Zeta P2 cordless biscuit joiner incl. 2 batteries and charger
- PRODUCT INFORMATION The cordless Zeta P2 is the profile biscuit joiner for even faster joints, suitable for use with P-System connectors. It is used to create the form-locking P-System groove within seconds, and is even more flexible to use thanks to its battery drive. The integrated vertical mechanical drive is automatically triggered at the maximum cutting depth and performs a lateral…
- Add to basket
Classic X cordless biscuit joiner, In carton; without batteries; without charger
- PRODUCT INFORMATION Classic X is the original biscuit joiner from the inventor of the Lamello system for cutting the 4 mm groove. The proven and well-designed Classic X is fast and versatile in its use and the basis for the wide range of connectors with fixed, self-clamping and detachable solutions. Precision in every component leads to perfect accuracy of the workpieces,…
- Add to basket
Biscuit joiner Classic X, 230 V in a cardboard box
- PRODUCT INFORMATION Classic X is the original biscuit joiner from the inventor of the Lamello System for cutting the 4 mm groove. The proven and well-designed Classic X is fast and versatile in its use and the basis for the wide range of connectors with fixed, self-clamping and detachable solutions. Precision in every component leads to perfect accuracy of the workpieces and saves time. The multifunctional stop square allows perfect mitres…
- Add to basket
Biscuit joiner Classic X, 230 V in a Systainer
- PRODUCT INFORMATION Classic X is the original biscuit joiner from the inventor of the Lamello System for cutting the 4 mm groove. The proven and well-designed Classic X is fast and versatile in its use and the basis for the wide range of connectors with fixed, self-clamping and detachable solutions. Precision in every component leads to perfect accuracy of the workpieces and saves time. The multifunctional stop square allows perfect mitres…
- Add to basket
Biscuit joiner Top 21, 230 V
- PRODUCT INFORMATION Top 21 is the biscuit joiner from the inventor of the Lamello System and includes a height adjustable blade for cutting the 4 mm groove. The unique height adjustment of the cutter in steps from 0.1 mm to max. 4 mm allows positioning the groove in the middle of the material thickness. Precision in every component leads to perfect accuracy of the workpieces and saves time. The multifunctional…
- Add to basket
Zeta P2-Set, 230V GB, P-groove cutter – Diamond Blade
- PRODUCT INFORMATION The Zeta P2 is the biscuit joiner for P-System connectors and is used to create the formlocking P-System goove within seconds. The integrated vertical mechanical drive is automatically triggered at the maximum cutting depth and performs a lateral cutter movement for the P-System groove. Connectors with various functions and different sizes can now be inserted into the form-locking P-System groove. The insertion into the groove is…
- Add to basket
Zeta P2-Set, 230V GB, P-groove cutter – TCT Blade
- PRODUCT INFORMATION The Zeta P2 is the biscuit joiner for P-System connectors and is used to create the formlocking P-System goove within seconds. The integrated vertical mechanical drive is automatically triggered at the maximum cutting depth and performs a lateral cutter movement for the P-System groove. Connectors with various functions and different sizes can now be inserted into the form-locking P-System groove. The insertion into the groove is…
- Add to basket
Drilling gauge for Clamex S
- PRODUCT INFORMATION Lamello 125240 30°-150° Drill Jig for Clamex S-18 Connectors. View Lamello range here Lamello catalogue ORDER INFORMATION
- Add to basket
Lamello 60cm Carcass Clamping Set
- PRODUCT INFORMATION Clamping set is a system for glueing cabinets and various other components in furniture production and is an addition to the Lamello System. The clamping set consists of profile sections to protect the edges, 8 meter long straps with tensioners and two tension hooks. Unlike with screw clamps, the pressure distribution is always uniform, which means furniture is automatically clamped at right angles regardless of whether the panels…
- Add to basket
P-System groove cutter, DP (diamond) for CNC
- PRODUCT INFORMATION The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbor is used the dimensions of which vary according to…
- Add to basket
P-System groove cutter, HW (carbide) for Zeta
- PRODUCT INFORMATION P-System groove cutter for Zeta, HW (carbide) , Ø100.9x7xØ22 mm, Z3, NL 4 Technical Data Diameter (mm) - 22 Thickness (mm) - 7 Teeth - 3 Speed (min-1) - 13300 Technical information View Lamello range here Lamello page ORDER INFORMATION
- Add to basket
P-System groove cutter, DP (diamond) for Zeta
- PRODUCT INFORMATION Lamello P-System groove cutter for Zeta, DP (diamond) , Ø100.4x7xØ22 mm Technical Data Diameter (mm) - 22 Thickness (mm) - 3 Teeth - 3 Speed (min-1) - 15200 Technical information View Lamello range here Lamello page ORDER INFORMATION
- Add to basket
Groove cutter HW, 100 x 8 mm, Z4 + V4
- PRODUCT INFORMATION Groove cutter HW, 100 x 8 mm, Z4 + V4 Suitable for all Lamello slot milling machines Dimensions (mm): 100 x 8 x 22 Technical information View Lamello range here Lamello page ORDER INFORMATION
- Add to basket
Groove cutter HW,100 x 4, Z6 alternating
- PRODUCT INFORMATION Lamello Groove cutter HW for Classic X, Ø100x4xØ22 mm, Z6 alternating teeth Technical Data Diameter (mm) - 22 Thickness (mm) - 7 Teeth - 6 Speed (min-1) - 18000 Technical information View Lamello range here Lamello page ORDER INFORMATION
- Read more
Form cutter Patchmaker, HW, Z2
- PRODUCT INFORMATION Lamello 131600 Profile cutter Z2 for the Patchmaker Suitable for the patchmaker Shaft diameter 8 mm Technical information View Lamello range here Lamello page ORDER INFORMATION
- Add to basket
Spiral drill 6 mm
- PRODUCT INFORMATION With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint…
- Add to basket
Divario P-18 marking jig
- PRODUCT INFORMATION Lamello Divario P-18 marking jig metal, incl. drill and rotating depth stop Technical information View Lamello range here Lamello page ORDER INFORMATION
- Add to basket
Divario P-18 installation tool
- PRODUCT INFORMATION With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint…
- Add to basket
Drilling jig for Clamex P-14, long version
- PRODUCT INFORMATION Lamello Clamex P drill jig long, incl. drill Ø6 mm, for P-14 groove Technical information View Lamello range here Lamello page ORDER INFORMATION
- Add to basket
P-System drill jig, for Clamex P-14, P-10
- PRODUCT INFORMATION This drill jig is suitable for drilling the 6mm hole required to gain access to the locking mechanism for the Lamello Clamex S and Clamex P joints. Use for angles up to 22.5°. Supplied with drill bit and depth collar. Use with Lamello P-14, P-15 and P-10 connectors. Jig to drill 6mm hole required for access to locking mechanism…
- Add to basket