• Clamex S-20 Starter set Quick View
    • Clamex S-20 Starter set Quick View
    • Clamex S-20 Starter set

    • PRODUCT INFORMATION Available from 4th of September 2023.  Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16 mm and is fastened in the groove with screws. The symmetric 4 mm grooves can be created with any biscuit joiner. Clamex S-20 is connected to the counterpart with a lever and has a lateral installation tolerance. It…
    • Add to basket
  • Clamex S-20, 1000 pairs Quick View
    • Clamex S-20, 1000 pairs Quick View
    • Clamex S-20, 1000 pairs

    • PRODUCT INFORMATION Available from 4th of September 2023.  Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16 mm and is fastened in the groove with screws. The symmetric 4 mm grooves can be created with any biscuit joiner. Clamex S-20 is connected to the counterpart with a lever and has a lateral installation tolerance. It…
    • Add to basket
  • Clamex S-20, 300 pairs Quick View
    • Clamex S-20, 300 pairs Quick View
    • Clamex S-20, 300 pairs

    • PRODUCT INFORMATION Available from 4th of September 2023.  Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16 mm and is fastened in the groove with screws. The symmetric 4 mm grooves can be created with any biscuit joiner. Clamex S-20 is connected to the counterpart with a lever and has a lateral installation tolerance. It…
    • Add to basket
  • Clamex S-20, 80 pairs, incl. screws Quick View
    • Clamex S-20, 80 pairs, incl. screws Quick View
    • Clamex S-20, 80 pairs, incl. screws

    • PRODUCT INFORMATION Available from 4th of September 2023.  Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16 mm and is fastened in the groove with screws. The symmetric 4 mm grooves can be created with any biscuit joiner. Clamex S-20 is connected to the counterpart with a lever and has a lateral installation tolerance. It…
    • Add to basket
  • Clamex S-20, 20 pairs Quick View
    • Clamex S-20, 20 pairs Quick View
    • Clamex S-20, 20 pairs

    • PRODUCT INFORMATION Available from 4th of September 2023.  Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16 mm and is fastened in the groove with screws. The symmetric 4 mm grooves can be created with any biscuit joiner. Clamex S-20 is connected to the counterpart with a lever and has a lateral installation tolerance. It…
    • Add to basket
  • Invis Mx2 MiniMag, incl. screw bit Quick View
    • Invis Mx2 MiniMag, incl. screw bit Quick View
    • Invis Mx2 MiniMag, incl. screw bit

    • PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
    • Add to basket
  • Invis Mx2 Starterset, in systainer Quick View
    • Invis Mx2 Starterset, in systainer Quick View
    • Invis Mx2 Starterset, in systainer

    • PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
    • Add to basket
  • Invis Mx2 joiner set, 20 pairs incl. 30 mm studs Quick View
    • Invis Mx2 joiner set, 20 pairs incl. 30 mm studs Quick View
    • Invis Mx2 joiner set, 20 pairs incl. 30 mm studs

    • PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
    • Add to basket
  • Invis Mx2 joiner set, 20 pairs incl. 14 mm studs Quick View
    • Invis Mx2 joiner set, 20 pairs incl. 14 mm studs Quick View
    • Invis Mx2 joiner set, 20 pairs incl. 14 mm studs

    • PRODUCT INFORMATION Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg…
    • Add to basket
  • Cabineo cover cap, 100 pieces, RAL 9003 signal white Quick View
    • Cabineo cover cap, 100 pieces, RAL 9003 signal white Quick View
    • Cabineo cover cap, 100 pieces, RAL 9003 signal white

    • PRODUCT INFORMATION The new metallic colours „silver“, „nickel“ and „dark steel“ complete the already extensive Cabineo cover cap range. With the new metallic-look versions, the colour of the cover cap can be matched to the aluminium or stainless steel fittings and the Cabineo connector can become a design element in the piece of furniture. There are now different options for visually…
    • Add to basket
  • Cabineo 12, 500pcs Quick View
    • Cabineo 12, 500pcs Quick View
    • Cabineo 12, 500pcs

    • PRODUCT INFORMATION Cabineo 12 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with…
    • Add to basket
  • Cabineo 8,500pcs, for centre panels from 16mm Quick View
    • Cabineo 8,500pcs, for centre panels from 16mm Quick View
    • Cabineo 8,500pcs, for centre panels from 16mm

    • PRODUCT INFORMATION Cabineo 8 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with…
    • Add to basket