View basket “Bisco P-14, 80 pieces” has been added to your basket.
If you spend another £125.63 you will get FREE SHIPPING!
-
Clamex P-14, 300 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
-
Clamex P-14, 80 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
-
Clamex P-14/10 Flexus, 300 pairs
- PRODUCT INFORMATION Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and…
- Add to basket
-
Clamex P-14/10 Flexus, 80 pairs
- PRODUCT INFORMATION Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and…
- Add to basket
-
P-System connector assortment basic, in systainer
- PRODUCT INFORMATION Lamello 145314 P-system connector assortment Basic Set includes: 80 pairs Clamex P-14 80 pairs Tenso P-14 incl. clip 60 pairs Clamex P Medius 20 stuks Bisco P 14 Systainer T-Loc II incl. compartment dividers Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
-
P-System connector assortment professional, in Sortainer
- PRODUCT INFORMATION The Lamello 145312 Professional P-System Connector Assortment is the perfect add-on to your Zeta. With an assortment of different connectors and accessories, this set will keep your organized and efficient while introducing you to the various connector options. Set includes: 120 pair Clamex P-14 30 pair Clamex P Medius 30 pair Clamex P-10 80 pair Tenso P-14 plus pre-load…
- Add to basket
-
Bisco P-10, 80 pieces
- PRODUCT INFORMATION Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined…
- Add to basket
-
Bisco P-14, 80 pieces
- PRODUCT INFORMATION Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined…
- Add to basket
-
Clamex S-18, 80 pairs, incl. marking jig and screws
- PRODUCT INFORMATION Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in…
- Add to basket
-
Clamex S-18, 18 pairs, incl. marking jig and screws
- PRODUCT INFORMATION Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in…
- Add to basket
-
E20-l self-clamping element, 80 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
-
E20-H self-clamping element, 80 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
