Clamex P-10, 300 pairs
- PRODUCT INFORMATION Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and…
- Add to basket
Clamex P-10, 80 pairs
- PRODUCT INFORMATION Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and…
- Add to basket
Clamex P-14/10 Medius, 300 pairs
- PRODUCT INFORMATION Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a lever. The connector for divisions has two installation depths and is used when two shelves are attached to the same dividing panel at the same height. Due to the reduced installation depth of 10…
- Add to basket
Clamex P-14/10 Medius, 80 pairs
- PRODUCT INFORMATION Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a lever. The connector for divisions has two installation depths and is used when two shelves are attached to the same dividing panel at the same height. Due to the reduced installation depth of 10…
- Add to basket
Clamex P-14, 1000 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14, 300 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14, 80 pairs
- PRODUCT INFORMATION Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-14 is used on mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14/10 Flexus, 300 pairs
- PRODUCT INFORMATION Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and…
- Add to basket
Clamex P-14/10 Flexus, 80 pairs
- PRODUCT INFORMATION Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and…
- Add to basket
P-System connector assortment basic, in systainer
- PRODUCT INFORMATION Lamello 145314 P-system connector assortment Basic Set includes: 80 pairs Clamex P-14 80 pairs Tenso P-14 incl. clip 60 pairs Clamex P Medius 20 stuks Bisco P 14 Systainer T-Loc II incl. compartment dividers Technical information View Lamello range here Lamello page Catalog page ORDER INFORMATION
- Add to basket
P-System connector assortment professional, in Sortainer
- PRODUCT INFORMATION The Lamello 145312 Professional P-System Connector Assortment is the perfect add-on to your Zeta. With an assortment of different connectors and accessories, this set will keep your organized and efficient while introducing you to the various connector options. Set includes: 120 pair Clamex P-14 30 pair Clamex P Medius 30 pair Clamex P-10 80 pair Tenso P-14 plus pre-load…
- Add to basket
Bisco P-10, 80 pieces
- PRODUCT INFORMATION Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined…
- Add to basket
Bisco P-14, 80 pieces
- PRODUCT INFORMATION Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in combination with Clamex or Tenso as a cost-effective alignment element and ensures flushness of the joint. The Bisco can also be used as a dry joint as a test before the work piece is permanently joined…
- Add to basket
Clamex S-18, 80 pairs, incl. marking jig and screws
- PRODUCT INFORMATION Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in…
- Add to basket
Clamex S-18, 18 pairs, incl. marking jig and screws
- PRODUCT INFORMATION Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in…
- Add to basket
E20-l self-clamping element, 80 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
E20-H self-clamping element, 80 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
E20-L/E20-H self-clamping element assorted , 40/40 pieces
- PRODUCT INFORMATION E20 is a self-clamping element and can be used with any Lamello biscuit joiner. The E20 is driven into the 4 mm groove using a hammer. During insertion, the curved ridges on each side of the connector hold in the groove and clamp the workpieces together. E20 serves as a perfect glueing aid in the workshop or on site. E20-L is suitable for surface joints such…
- Add to basket
C10 transparent element, 300 pieces
- PRODUCT INFORMATION C10 and C20 plastic biscuits are the proven joining solution for mineral composite materials such as Corian, Varicor. The white transparent plastic ensures that the connectors do not show through thin materials. The specific adhesive for composites can be used for the joints as well as for the biscuits. Since the C10 and C20 do not swell, these biscuits are also suitable for outdoor or wet areas. The…
- Add to basket
C20 transparent element, 250 pieces
- PRODUCT INFORMATION C10 and C20 plastic biscuits are the proven joining solution for mineral composite materials such as Corian, Varicor. The white transparent plastic ensures that the connectors do not show through thin materials. The specific adhesive for composites can be used for the joints as well as for the biscuits. Since the C10 and C20 do not swell, these biscuits are also suitable for outdoor or wet areas. The…
- Add to basket
K20 clamping element , 250 pieces
- PRODUCT INFORMATION K20 is a clamping element and can be used with any Lamello biscuit joiner. K20 has barbed ridges on each side of the connector which anchor themsleves into the 4 mm groove. The clamping biscuit is ideal for difficult to clamp workpieces such as fillers or covers and is able to hold workpieces in the correct position until the…
- Add to basket
Lamello Original wood biscuit 20, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
Lamello Original wood biscuit 10, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
Lamello Original wood biscuit H9, 1000 pieces
- PRODUCT INFORMATION The original wood biscuit is the proven solution for wood joints and the original from the inventor of the system. The original wood biscuit guarantees quality with its dimensional accuracy, optimal glue distribution, dimensional stability as well as the sustainable cultivation of the beech wood. The perfect fit demonstrates its value from the very start, when the biscuits are…
- Add to basket
