PRODUCT INFORMATION The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbor is used the dimensions of which vary according to…
PRODUCT INFORMATION P-System groove cutter for Zeta, HW (carbide) , Ø100.9x7xØ22 mm, Z3, NL 4 Technical Data Diameter (mm) - 22 Thickness (mm) - 7 Teeth - 3 Speed (min-1) - 13300 Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION Lamello P-System groove cutter for Zeta, DP (diamond) , Ø100.4x7xØ22 mm Technical Data Diameter (mm) - 22 Thickness (mm) - 3 Teeth - 3 Speed (min-1) - 15200 Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION Groove cutter HW, 100 x 8 mm, Z4 + V4 Suitable for all Lamello slot milling machines Dimensions (mm): 100 x 8 x 22 Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION Lamello Groove cutter HW for Classic X, Ø100x4xØ22 mm, Z6 alternating teeth Technical Data Diameter (mm) - 22 Thickness (mm) - 7 Teeth - 6 Speed (min-1) - 18000 Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION Lamello 131600 Profile cutter Z2 for the Patchmaker Suitable for the patchmaker Shaft diameter 8 mm Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint…
PRODUCT INFORMATION Lamello Divario P-18 marking jig metal, incl. drill and rotating depth stop Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint…
PRODUCT INFORMATION Lamello Clamex P drill jig long, incl. drill Ø6 mm, for P-14 groove Technical information View Lamello range here Lamello page ORDER INFORMATION
PRODUCT INFORMATION This drill jig is suitable for drilling the 6mm hole required to gain access to the locking mechanism for the Lamello Clamex S and Clamex P joints. Use for angles up to 22.5°. Supplied with drill bit and depth collar. Use with Lamello P-14, P-15 and P-10 connectors. Jig to drill 6mm hole required for access to locking mechanism…
