PRODUCT INFORMATION TARGET J12 connecting fitting screw. TARGET J12 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. The height of leveler Integrato A (IF6565-470 H-12 mm and IF6565-480 H-25 mm)…
PRODUCT INFORMATION TARGET J12 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. The height of leveller Integrato A (IF6565-470 H-12 mm and IF6565-480 H-25 mm) can be regulated through the…
PRODUCT INFORMATION TARGET J10 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. Download data sheet. ORDER INFORMATION
PRODUCT INFORMATION The dimensions of the Dish holder: 150x270x85 mm (width×depth×height). The dimensions of the End caps dish holder kit CLASSIC: 25x270x85 mm (width×depth×height). Available finishes : Grey Abs, White Abs and Anthracite Abs. ARTICLE NUMBER Dish holder: MC326583-MC490033 Download catalog page. End caps for dish holder: MC326593-MC490043 Download catalog page. *Upon request. Delivery time 4-5 weeks. Please check with us…
PRODUCT INFORMATION Suitable for modular furniture with plinth of min. 20mm (IF6565-470) or min. 38,5mm (IF6565-480). Capable of supporting a 175 kg load each. The zinc alloy die-cast foot, is provided with an indipen- dent engineering plastic glide in order to make the adjustment easier and to prevent the scratching of the floor too. Height adjustment: 0-12 mm (IF6565-470) or 0-25 mm (IF6565-480).…
PRODUCT INFORMATION INTEGRATO D. With pins for 5 mm hole. Suitable for modular furniture with plinth of min. 20mm (IF3010-41) or min. 38,5mm (IF3010-42). Capable of supporting a 175 kg load each. The zinc alloy die-cast foot, is provided with an indipen- dent engineering plastic glide in order to make the adjustment easier and to prevent the scratching of the floor…
PRODUCT INFORMATION Thanks to the reduced size and minimal design, K12 System provides a new concept of elegance in all details. The lift-up version is available in a wide range of N strengths and in three different lengths, to suit any door dimension and weight. K12 System is an easy-to-install solution that makes additional screws unnecessary, improving the aesthetic and reducing…
PRODUCT INFORMATION Thanks to the reduced size and minimal design, K12 System ADJ provides a new concept of elegance in all details. The lift-up version is available in a wide range of N strengths and in three different lengths, to suit any door dimension and weight. K12 System ADJ is an easy-to-install solution that makes additional screws unnecessary, improving the aesthetic…
PRODUCT INFORMATION Drop down mechanism KRABY. Mechanism is design for doors which are opened down Once you begin to open the door, it continues to open gently and completely by itself. To change the time in opening and closing of the door by adjusting the position of the piston base plate within the "U" slot of the side bracket. Suitable for mounting in a wooden…
PRODUCT INFORMATION Friction opening system Kraby. Used for kitchen, office, living room, hallway and other furniture. Lifting power - 45-120 N. Provided opening angle adjustment through the rotary knob. Suitable for mounting in a wooden or aluminum profile doors. Mounting in a narrow profile doors bracket adapter is required. Gas stays are made in Germany. This product requires : Automatic opening mechanism bracket (nickel plated)…
