Hailo BIG BOX, 15 l
- PRODUCT INFORMATION Hailo BIG BOX, for hinged door cabinets from 400 mm width SPECIAL FEATURES Attention! Not suitable in combination with dampened door hinges May be installed on left or on right sidewall SPECIFICATIONS Cabinet-width min. (cm) : 40 Cabinet-width max. (cm) : 90 available Cabinet-depth min. (mm) : 306 Product dimensions (WxDxH) (mm) : 306 x 306 x 335 Height, mm…
- Select options
TARGET J12 pinion screw
- PRODUCT INFORMATION TARGET J12 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. The height of leveler Integrato A (IF6565-470 H-12 mm and IF6565-480 H-25 mm) can be regulated through the pinion…
- Select options
TARGET J12 connecting fitting screw, euro
- PRODUCT INFORMATION TARGET J12 connecting fitting screw. TARGET J12 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. The height of leveler Integrato A (IF6565-470 H-12 mm and IF6565-480 H-25 mm)…
- Select options
TARGET J12 connecting fitting screw, M6
- PRODUCT INFORMATION TARGET J12 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. The height of leveller Integrato A (IF6565-470 H-12 mm and IF6565-480 H-25 mm) can be regulated through the…
- Add to basket
TARGET J10 pinion screw
- PRODUCT INFORMATION TARGET J10 - connecting fitting with high fastening capacity, suitable for mounting with wood dowels. Easy pre-assembling: simple pre-insertion into the panels. Conceived for automatic assembling. Strong structural fastening: the panels are hard and securely fastened, therefore the cabinet is 100% stress-resistant. Download data sheet. ORDER INFORMATION
- Select options
Dish holder
- PRODUCT INFORMATION The dimensions of the Dish holder: 150x270x85 mm (width×depth×height). The dimensions of the End caps dish holder kit CLASSIC: 25x270x85 mm (width×depth×height). Available finishes : Grey Abs, White Abs and Anthracite Abs. ARTICLE NUMBER Dish holder: MC326583-MC490033 Download catalog page. End caps for dish holder: MC326593-MC490043 Download catalog page. *Upon request. Delivery time 4-5 weeks. Please check with us…
- Select options
Plinth support with a threaded finger
- PRODUCT INFORMATION To mount a threaded finger it necessary Ø5x10 mm hole. Width,mm : 24. Height, mm : 44. ORDER INFORMATION
- Add to basket
INTEGRATO A
- PRODUCT INFORMATION Suitable for modular furniture with plinth of min. 20mm (IF6565-470) or min. 38,5mm (IF6565-480). Capable of supporting a 175 kg load each. The zinc alloy die-cast foot, is provided with an indipen- dent engineering plastic glide in order to make the adjustment easier and to prevent the scratching of the floor too. Height adjustment: 0-12 mm (IF6565-470) or 0-25 mm (IF6565-480).…
- Select options
INTEGRATO D
- PRODUCT INFORMATION INTEGRATO D. With pins for 5 mm hole. Suitable for modular furniture with plinth of min. 20mm (IF3010-41) or min. 38,5mm (IF3010-42). Capable of supporting a 175 kg load each. The zinc alloy die-cast foot, is provided with an indipen- dent engineering plastic glide in order to make the adjustment easier and to prevent the scratching of the floor…
- Select options
DOOR BUFFERS BI-MATERIAL
- PRODUCT INFORMATION DOOR BUFFERS BI-MATERIAL. Diameter, mm : 5. Finish : Transparent. ORDER INFORMATION
- Add to basket
Lift up mechanism K12
- PRODUCT INFORMATION Thanks to the reduced size and minimal design, K12 System provides a new concept of elegance in all details. The lift-up version is available in a wide range of N strengths and in three different lengths, to suit any door dimension and weight. K12 System is an easy-to-install solution that makes additional screws unnecessary, improving the aesthetic and reducing…
- Select options
Drop down mechanism “K12 ADJ”
- PRODUCT INFORMATION Thanks to the reduced size and minimal design, K12 System ADJ provides a new concept of elegance in all details. The lift-up version is available in a wide range of N strengths and in three different lengths, to suit any door dimension and weight. K12 System ADJ is an easy-to-install solution that makes additional screws unnecessary, improving the aesthetic…
- Select options
Drop down mechanism “KRABY”
- PRODUCT INFORMATION Drop down mechanism KRABY. Mechanism is design for doors which are opened down Once you begin to open the door, it continues to open gently and completely by itself. To change the time in opening and closing of the door by adjusting the position of the piston base plate within the "U" slot of the side bracket. Suitable for mounting in a wooden…
- Select options
- Out of Stock
Friction opening system Kraby
- PRODUCT INFORMATION Friction opening system Kraby. Used for kitchen, office, living room, hallway and other furniture. Lifting power - 45-120 N. Provided opening angle adjustment through the rotary knob. Suitable for mounting in a wooden or aluminum profile doors. Mounting in a narrow profile doors bracket adapter is required. Gas stays are made in Germany. This product requires : Automatic opening mechanism bracket (nickel plated)…
- Read more
Automatic opening system “KRABY”
- PRODUCT INFORMATION Automatic opening system "KRABY" Used for kitchen, office, living room, hallway and other furniture. Lifting power - 50-140 N. Provided opening angle adjustment through the rotary knob. Suitable for mounting in a wooden or aluminum profile doors. Mounting in a narrow profile doors bracket adapter is required. Gas stays are made in Germany This product requires : Automatic opening mechanism bracket (nickel plated)…
- Select options
Opening Mechanism for Flap Doors “MINIWINCH”
- PRODUCT INFORMATION It is a symmetrical opening mechanism for flap doors both solid and framed. Springs with different force allow to use doors from 200 to 480 mm height, 1,4 - 14,5 kg flow capacity. Mechanism can be mounted in both horizontal and vertical position, for narrow cabinets, it is symmetrical and applicable both right and left side panel. Fixation by drilling…
- Select options
Opening Mechanism for Flap Doors “MICROWINCH”
- PRODUCT INFORMATION It is a symmetrical opening mechanism for flap doors both solid and framed. Springs with different force allow to use doors from 210 to 480 mm height, up to 9 kg flow capacity. Mechanism can be mounted in both horizontal and vertical position, for narrow cabinets, it is symmetrical and applicable both right and left side panel. The covers are…
- Select options
Drop down mechanism “K12”
- PRODUCT INFORMATION Thanks to the reduced size and minimal design, K12 System provides a new concept of elegance in all details. The drop-down version is available in three different lengths and with a universal "zero" N strength, to suit any door dimension and weight. K12 System is an easy-to-install solution that makes additional screws unnecessary, improving the aesthetic and reducing assembling…
- Select options
Lift up mechanism “K12 ADJ”
- PRODUCT INFORMATION Thanks to the reduced size and minimal design, K12 System ADJ provides a new concept of elegance in all details. The lift-up version is available in a wide range of N strengths and in three different lengths, to suit any door dimension and weight. K12 System ADJ is an easy-to-install solution that makes additional screws unnecessary, improving the aesthetic…
- Select options
REKORD 12
- PRODUCT INFORMATION Suitable for panel from 18 mm tick. Maximum load capacity for one support - 150 kg. Height adjustment 0-12 mm, allen key. Height adjustment is made by rotating zinc alloy part regardless plastic part. This way makes adjustment easier and protects the floor from damage. Made of glass fiber and special plastic. Download mounting instructions ORDER INFORMATION
- Select options
INTEGRATO Z
- PRODUCT INFORMATION Suitable for structures without the plinth. For panel up to 18 mm tick or more. It provides stability for heavy cabinet furniture. Maximum load capacity for one support - 175 kg. Height adjustment: 0-12 mm. The height of supports are adjustable through the cabinet bottom pierced hole (8-12 mm diameter). Height adjustment is made by rotating zinc alloy part regardless plastick part.…
- Add to basket
Bracket adapter for narrow aluminum profile doors (nickel plated) for “KRABY”
- PRODUCT INFORMATION Bracket adapter for narrow aluminum profile doors (nickel plated) for OPENING SYSTEM “KRABY” ORDER INFORMATION
- Read more
Side plate fastened with screws (nickel plated) for “KRABY”
- PRODUCT INFORMATION Side plate fastened with screws (nickel plated) for OPENING SYSTEM “KRABY” ORDER INFORMATION
- Add to basket
Side plate with 2pcs. pins ø=5 mm (nickel plated) for “KRABY”
- PRODUCT INFORMATION Side plate with 2pcs. pins ø=5 mm (nickel plated) for OPENING SYSTEM “KRABY” ORDER INFORMATION
- Add to basket